Showing posts with label tutorials. Show all posts
Showing posts with label tutorials. Show all posts

UPCYCLED Christimas Ornaments | Wine Corks and Wire Hangers = Yoga Love | Tutorial

Here's an easy-peasy wine cork tutorial you will love.

You will need two wine corks

(yes, this will require you to drink the wine - you can thank me later .. or just fall asleep, that's what I do)

2 large eyehooks

(I used 1-15/16" - you can also use the wire hanger wire for the heads if you are feeling particularly strong - maybe do this before you drink the wine) and 1 wire hanger.

You'll need some tin snips or pliers to cut the wire, something to bend the wire around (I used a nail in a board clamped to a table), a hand drill and glue.


1. gather your supplies

2. mark a center hole and screw in your eyehooks - you will see when you do this why I love to work with this nice, soft wood (of course, my arms and shoulders are still a mess, so go figure)

3. cut corners of wire hangers for arms - the sizing isn't as important as consistency, so just make them both the same size - bend as needed around your nail using two sets of pliers, bend hands - work carefully the wire will be sharp

drill arm holes and glue in arms

4. cut straight wire for legs, bend as needed for knee and both feet, drill holes, glue in legs


My lotus pose (sitting) wine cork ornament's legs were a little wonky, but here is a closer look. I used the top folds of the wire hanger. Just make yours more consistent than mine! But you can see perfection is not needed with these little guys - have fun with it. ---->

NOW drop and give me ZEN :)


Upcycled SAFETY PIN Necklace for Mother's Day | Tutorial

Here's a DIY safety pin necklace tutorial you will love. A totally adorable and easy peasy handmade gift for the mom who takes her safety pins (although maybe not her own personal safety) seriously.


Now some DIY tutorial makers might tell you to glue those safety pins closed and add a nice safe lobster clasp to the back ... but Olive and I, well, we think moms are a little tougher than that ..... xo all

Recycle JAR LIDS Into Compact Mirrors - Upcycled Tutorial

recycled jar lids
As part of Team EcoEtsy's Trash to Treasure Challenge I made these easy, peasy compact mirrors from jar lids.

Of course, mine are magnetic, but since you may not have the magnets on hand to pull this off - I created some other options, too!

Step 1. Get yourself some jar lids. You may need to raid friends' refrigerators and cupboards for the sizes you need. A girl's gotta do what a girl's gotta do.

<------ If you don't want to walk around town randomly smearing lipstick on your face - yuck -

you need a mirror.

Hub's pickles look like this now ------->

I told him, "It's this or I go out with lipstick smeared under my nose". Yes, these were his options ... he handed over the lid.

(I somehow still end up with lipstick smeared under my nose though, go figure). 

Step 2. Get yourself some mirrors - hit up your local craft store with that gift card your Aunt Ethel gave you when you "started that crafty business of yours".

Now it goes without saying, but I'll just go ahead and say it, you have to coordinate the sizes here - tops, bottoms and mirrors. Good luck with this.

Step 3. Decide on your style. Lids can be painted, paper or fabric covered or left naked. I like my upcycled thingamajigs to retain some connection to their former life and don't mind carrying a Barilla Pasta Sauce compact mirror (maybe you would - I don't judge).

Writing can sometimes be removed with nail polish remover - check out the one I punched with "Mirror, Mirror ...." in the top photo.

Step 4. For the one sided mirror - simply hot glue the mirror inside the lid (after decorating lid).

For the magnetic compact - glue the magnets in the lids (both sides) - check your polarity (warning shameless plug ahead - have you seen my Polarity Magnetic Lockets - I think you need one) - magnets must be glued in precisely the right places. I'm a magnet expert. You might not be - so go slow and check your polarity AGAIN. Then carefully glue the mirrors on top of the magnets.

If the bottom lid fits tightly into the top lid you can skip the magnets, but you might have trouble opening it.

I glued a tag from a t-shirt partially under the mirror to hang outside the compact and act as a pull tab for me to open it easily.

If your lids don't fit together snugly and you don't want to take out a second mortgage to buy enough magnets to make this all work

(please don't show up at my door with your hand out or sneak into my studio with steel in your pocket and think you can slip out the back without me noticing the magnets stuck to your pants - no one has ever been that happy to see me, believe me, I'll notice)

a nice thick rubberband, ink stamped with some encouraging words will do the trick.

Christmas Countdown - Upcycled Puzzle Key Rack / Keychain


I turned this adorable vintage Peanuts puzzle into a handy hanging key rack in just a few minutes!

The total plus is that I get to carry my keys on a keychain shaped liked Snoopy's ear

(hubs is not so happy with the shoe, but the maker always gets first choice with things like this - it's a universal law ... like gravity)

All you need to have your own little keyrack is a wood tray puzzle (the puzzle has its own cut out holder), eyehooks, washers, keyrings, velcro, glue and a drill.

It doesn't get much easier than this.


Get yourself an awesome tray puzzle (preferably Snoopy - trust me, you need Snoopy for this one) - I got this puzzle from RetroRocketBaby then remove the pieces, add a sawtooth hanger to the back (you might want to measure for this, I like giant sawtooths so I can just eyeball them)

AVOID MY MISTAKE - be certain your hanger goes into the tray border or it will pop through into your puzzle area and your pieces will not lay flat

Glue the pieces you will not be using as keychains into the tray. Drill holes in your 'keychain' pieces and add a washer and eyehook. Add velcro to the back of your keychain and the corresponding velcro to the area of the puzzle that holds that piece.

Voila! Puzzle/Key Rack (if you are lucky enough to get to carry around Snoopy's ear you will thank me for this one) - if you have a lot of keys you may need a long strip of velcro (or get rid of those keys you don't use - hubs says it's bad for your ignition to have all that weight hanging there anyway)

Upcycled Hotel Key Necklace - Holiday Gift Countdown Week # 5 -


This week's easy peasy jewelry tutorial turns a vintage hotel room key into a gorgeous little

(well maybe not so little, little is highly over-rated at times anyway)

necklace that your favorite traveler will love.

You will need to hunt down one of those amazing plastic hotel key tags and an old key.

I even found a vintage hotel room do not disturb sign from Etsy seller Papers of Old that makes the perfect little back tag to this piece.

You will need:



 




vintage key
hotel key fob
doodads
chain
jumprings
do not disturb sign

Just drill a hole in the bottom of the fob- add a fancy doodad with a jumpring, add the key to the top hole along with your chain and voila - some excitement for the weary traveler!



Mine is being gifted attached to this wonderful little do not disturb sign - love it!





Upcycled Holiday Gift Countdown Week # 4 - Book Clipboard



This week's easy-peasy upcycled gift is an amazing little clipboard book.

(you are probably now certain I am obsessed with books and clips and organization and you would be totally wrong - at least about the organization part - I am whatever the opposite of obsessed with organizaton would be right now)

I use these to hold my order forms at shows, but everyone needs a clipboard to keep all their little notes, photos and doodads handy.

This also looks great hanging on a wall or standing on a book shelf.


You will need:

a book, clipboard clips and hardware, screwdriver, drill





Grab a second book with your clip so you are not fighting to keep it open, mark your holes, drill, screw and voila!

If you need a personalized magnet for yours (any wording) just contact me and I will pop one in the mail to you.

I am making a half wall of these in my studio, will grab pics when I finally get the "about me" shop pics done.

My hard drive died yesterday and I am waiting to get my computer back with a new hard drive - fingers crossed tomorrow - they saved my files, but not the programs - why can't they ever save the programs? Ugh!




Christmas Upcycled Gift Countdown Week # 3 - Tray Magnetboard/ToDo Board


This is what I ask myself when prioritizing my day.

(yup it's pretty much the secret to my success here at Olive Bites folks, works pretty well for me - I do spend quite a bit of time napping, eating snacks and solving mysteries though, so it might not work for everyone)

This is a heavy vintage, enamel metal tray (a similar type of thing can be done with a smaller, lighter weight tray, too - see LOVE pic below),

some large adhesive letters from Lowe's ($1.50) and some magnets that read NOW, LATER and NEVER

(I can hook you up with the tops of these just email me and add your own magnets)

Now, you are probably thinking this does not need a step by step - you're right. It's pretty much cut and stick. I did have to take a few pics though so I can call this a TUTORIAL, otherwise it would be cheating.




(the LOVE tray has a little adhesive back hanger that I could hook you up with, too)

You could stencil something like this, too, if you are feeling very crafty and if your recipient might think stickers a bit .. tacky (stickers ... tacky ... get it) - the vintage green one above is a bonus gift for a special someone on my list. I do not think she minds tacky - especially when it is an awesome mint green circle of blooms and rust covered with hugs and kisses - who could resist that?

Dish Towel Holder Tutorial - Upcycled Gift Countdown Week 2 - and a quick history lesson for lazy hubbies - LESSON: no hubby has ever been shot while doing the dishes



Anyone who reads my blog

(and is paying attention I know that leaves many people out ... I won't hold it against you)

knows that I have a little bit of an obsession with upcycling books - as in I have the need to drill holes in them and otherwise destroy them.

(I blame my Nook)

This is a very simple gift that is as usual easy-peasy to make. I made this for a friend's black and white kitchen.

(I am trying to show her how vintage pieces can add character to a space - for times when my actual old as dirt self is not at her house providing the vintage character personally)

You will need:


a book -

that you can bear to part with, preferably something a little kitcheny - if it has Julia's face on it that is a total plus -

vintage kneader/masher, pipe holders, screws, marking pencil, drill, hanging hardware




1. mark your holes 2. drill your holes - as always when drilling into a book - go slowly - this is a lesson from Smokey the Bear, folks 3. attach your pipe hangers NOTE - you have to add your kneader/masher - what the hell is this thing anyway? -  at this point - I had 2 screws in when I realized there was no way to add the kneader/masher without taking them out - luckily you have me to guide you through this and you will not make this mistake  4. add a sawtooth hanger (drill, glue, hammer) to the back - you can measure the placements of everything - I just kind of eyeball things (since it's not going in my kitchen after all - ack)

VOILA! now you just need a super-amazing dish towel - I highly recommend one by the amazing Xenotees 


For another towel rack featuring a vintage rolling pin see my other tutorial HERE and for something else to do with the kneader/masher thingamajig see my other tutorial HERE

Upcycled Table Legs to Picture Hangers Tutorial - when good legs go bad



I snatched up some amazing old table legs and spindles recently with plans to put them in my garden,

but I decided a couple needed to end up indoors so they would last longer!

These are super-simple - just add back hangers and cup hooks and you are all set.

(my camera has been very temperamental lately so my pics are kind of blah, but the spindles are actually pretty cool and simple and add a touch of handmade whimsy to store bought frames)

I think a simple picture grouping with these hangers over a couple frames (not too many) could be amazing. 

Note - I tested these with my lead test kits I use for vintage - if they test for lead you might want to seal with varnish or pass them by especially if you have small children ...

2nd Note - A good feng shui tip for vintage is that old things can carry the vibration of their previous adventures so it is always good to keep them in bright sunlight for a day or two before bringing them indoors

and definitely give them a good "salt wipe down" - rock or sea salt pressed onto a damp cloth and wipe all surfaces. A lot of time the energy around old things is very stagnant because the previous owners let the things sit and that energy needs to be wiped out before you bring them into your life!

Also I should add that I have brought my computer back to my desk today and am 'sitting down' again - I was a lot more productive last week, but not in the way I had hoped ... more on this later ...

String Art Letters on Old Books - Upcycled Tutorial




Some may remember my string art project a year or so ago with rubber bands

(I learned a lot from that project including why this is called string art - my rubber bands have since launched themselves across my studio at odd moments zapping me in the back of the head - but great art can be dangerous folks, so rather than take it off the wall, I just work with my bicycle helmet on at all times now - this has created a lot of bad hair days, but on the plus side I am ready to jump on my bike in a flash if I need to make a run for it - ie the zombie apocalypse the CDC was denying existed a couple weeks ago - not that they would tell us if there was a zombie apocalypse or if a Polarity customer has gotten themselves magnetized to a street sign or something - not that this has happened ... yet, but I need to be ready)

I also learned complicated patterns are not for me.

(save them for the experts - ie 10 year olds at summer camp who make those amazing owls and sailboats).

Now I am not actually spelling out the word POLAR here, although we are expecting 100 degree temps today so this would not be a bad thing - but am still working on my last 3 letters.

Trying to decide if I should flip the books over and work on the blank back sides

(this is actually a display project for my upcoming wholesale shows).

The blank sides may be what I end up with, but I really, really love seeing the titles, even though it is all a bit busy, so I am going to try it both ways, but for today in this heat I will just stop with POLAR and focus on this

(since I don't have an air conditioner in here yet).

This is a totally easy project.

Just print out your letters, double stick tape them to your books, drill nail holes - note drilling into books is kind of like rubbing 2 sticks together, so drill slowly unless you want burn marks, nail around the letter, remove your paper template, string your embroidery floss.

There is no right or wrong way to do this - if you like things orderly you will probably need to take your time with your nail holes and strings and want to use the blank book backs.

Some tips would be - if you use the front of books, outline your letters (zigzag in and out) with the floss so you don't lose track of your nails and fill in areas you don't want to fill in, use a thread color that totally contrasts with the book (notice my letter R will probably have to be redone), when threading don't cross a nail head - you don't want a thread hiding a nail head - and you can totally use the small nail heads usually used in string art I wanted a kind of furniture nail head look with this.

Upcycled Mail Caddy Tutorial - Vintage Book & Dough Kneader



This is an easy peasy little mail caddy you can make with a vintage dough kneader and old book - I think this old stenographer's manual is perfect for office/studio mail!

(it unexpectedly ended up looking a bit like a giant mousetrap which is only a plus, since you know what they say about building a better mousetrap)

gather your supplies and your trusty drill - remember drilling into paper is kind of like starting a fire so unless you want your smoke detector going off or some possible eyelash loss (not that this has happened to me) - drill slowly


1. lay out your kneader with your pipe hangers and mark your holes 2. drill your book - I drill all the way through and then use screws that will be just a tiny bit shorter than the book depth 3. screw in your pipe hangers 4. add your mail - this would also make a great kitchen upcycle with an old recipe book and some recipe cards

Upcycled Paint by Number / Clipboard Tutorial


I picked up these amazing pups

(painted by Aunt Goldie in 1959 - I wish I had an Aunt Goldie - I think I will just start calling my Aunt Betty Aunt Goldie - I don't think she will mind)

at a vintage shop in Asheville last fall. I finally decided to add some clipboard clips to them and make gigantic clipboards.

 This one is easy-peasy, as mine always are!

You will need: a paint by number (of course you can paint your own), you can also use a puzzle - glue it down first - ack, clips (these can be drilled off old clipboards, just drill into the rivets or purchased new), screws, drill, screwdriver


1. Measure for center and mark your drill holes 2. Drill holes 3. Add screws - now I have a grinder to grind off the back of the screws like I do with the clipboard corkboards that I sell, you may need to add a back buffer of cardboard, wood, etc if they stick out too far - TIP - holding the clip opening while working with the screw hole takes the strength of 10 crafty mavens, so just do like I do and shove a book in it to hold it open.

These are super simple and are the perfect place to hold my growing (sorry hubs) people and their dogs picture collection!

Recycled Key and Keyhole Jewelry Tutorial


Now this is an easy-peasy

(just the way I like 'em)

way to repurpose old keyholes into jewelry. 

Sometimes you have to add some paint

(if you do use a light sealer - varnish or wax)

and sandpaper to give your keyhole the kind of character that starts screaming at you

"do something with me!"


You will need : old keyholes from cabinets, cases, etc, old key, chain, doodads

I don't think we need a step by step for this one.

Once you get the keyholes the way you would like them just add some large jumprings to the screw holes and head into your stash of doodads, beads and junk and have some fun with them.

Don't be afraid to mix your cool and warm hardware here - upcycling works best when it's eclectic and messy (in a good way) and all about us!